MHD F+G Series For PC | How To Download Free (Windows And Mac)

Rate this post

MHD F+G series is a new type of air cooler that integrates both fan and heat sink into one unit. It is designed for efficient heat dissipation and low noise. The cooler comes with a pre-installed fan that delivers a large amount of airflow to quickly cool your system. The heat sink is made of copper for better heat dissipation.

The latest MHD F+G Series for PC has come up with a few updates that are better than the previous version. Want to know those? Here are they:

MHD F+G Series Andorid App Summary

MHD Tuning UG has developed the MHD F+G Series for Android. You can find it under the Auto & Vehicles category on Play Store. Since its inception, MHD F+G Series has got over 71021+ users on board. For the user rating, it is currently holding a 4.7 rating and the latest version of it is version 3.86

The latest update of MHD F+G Series is Aug 19, 2022 for phones. You can’t use it on your PC directly. So, you have to use an Android emulator like BlueStacks Emulator, Memu Emulator, Nox Player Emulator, etc.

No worries, we will discuss the methods to run it on your computer using the emulators whether you use a PC or Mac. Follow the methods we’ve discussed below.

MHD F+G Series App Overview and Details

The MHD Flasher F+G Series is a complete flash tuning app for your BMW & Toyota Supra A90. Unlike a piggyback module, it is capable of complete DME remapping while retaining all OEM safety mechanisms. This allows for maximum performance, maximum safety, and unrivaled drivability.
Full OBD Flashing:
You can install MHD right at home and start tuning immediately! Simply download the MHD Flasher F+G-Series app that connects via a MHD WiFi adapter and your vehicle’s OBD-II port, start the app and within 5 minutes the initial installation is complete. Further map changes are much faster – only 20 seconds! You can revert your vehicle to the factory OEM flash at any point, and no initial backup is necessary.
Stage 1, Stage 2 und E85 OTS (Off The Shelf) Maps by PureBoost:

N55 EWG (Vehicles built after 07/2013 with electronic wastegate):
– Stage 1 (up to 360HP/540NM) (not available for M2 and X4 M40i)
– Stage 2 (up to 390HP/580NM)
– Stage 2+ (up to 430HP/630NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%

N55 PWG (pneumatic wastegate):
– Stage 1 (up to 340HP/540NM)
– Stage 2 (up to 370HP/580NM)
– Stage 2+ (up to 400HP/630NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E20 Maps for ethanol blends of 20%

S55 (BMW M3 / M4 F8x):
– Stage 1 (up to 530HP/700NM)
– Stage 2 (up to 560HP/780NM)
– Ethanol Mix Maps: Stage 1, 2 and 2+ E30 Maps for ethanol blends of 30%

– Stage 1 (up to 440HP/600NM)
– Stage 2 (up to 470HP/650NM)
– Stage 2+HPFP (up to 500HP/700NM)
– Ethanol Mix Maps: Stage 1, 2 Maps for ethanol blends of 30%

– Stage 1 (up to 630HP/750NM)
– Stage 2 (up to 700HP/850NM)
– Ethanol Mix Maps (up to 750HP / 880NM): Stage 1 & 2 E30+ Maps for – ethanol blends of 30%+

– Stage 1 (up to 720HP/900NM)
– Stage 2 (up to 780HP/950NM)
– Ethanol Mix Maps (up to 800HP/1000NM): Stage 1 and 2 Maps for ethanol blends of 30%+

Stage 1 (up to 200HP/280NM, 93oct/98RON)
Stage 2 (up to 235HP/350NM, 93oct/98RON)
Full Data Logging and Live Gauges: Monitor your engine behavior to make sure it is running perfectly using a configurable and very responsive gauge layout. 50+ engine parameters are available at a glance!
These flash options can be applied to any map directly through the app:

– Anti Lag (N55/S55/N13 only at the moment)
– Exhaust Burble (duration & aggressiveness, min/max speed, min/max rpm)
– Remove top speed limiter (Vmax)
– CAN ethanol content reading (N55/S55/N13 only at the moment)
– Cold start noise reduction
– Exhaust flap open in sport mode
– Limit power per gear
– XHP TCU flash support (optimized OTS maps)
– Sport cooling mode for increased water / air intercooler cooling
– and many more
Check out our homepage / user manual for more information, supported cars and recommended modifications for each stage.

Features of MHD F+G Series for PC

of 30%+

Install “MHD F+G Series” on PC: Windows 10/8/7 & Mac

If you want to run the MHD F+G Series on your PC, you’ll need the Memu android emulator. Here is the process of installing both on your PC:

  • Download the Memu android emulator on your computer and install it. It will take a few minutes from start to finish.
  • While finishing, keep the Open when finished checked and other additional offers unchecked.
  • Once installed and opened, you’ll see a familiar interface with familiar apps on the screen, including Play store.
  • Click on the Play store and log into your account using your google email and password that you use on your phone.
  • You can now search for the MHD F+G Series app within Play store. It will show you the app on the search results in the first position.
  • Click on the app name and then click install to begin the download process on your computer to install MHD F+G Series.
  • It may take a few minutes for the entire process. Once complete, you can now open the app from your desktop or the emulator homepage.
MHD F+G Series App Specification
App Name: MHD F+G Series On Your PC
Devoloper Name: MHD Tuning UG
Latest Version: version 3.86
Android Version: 5.0
Supporting OS: Windows,7,8,10 & Mac (32 Bit, 64 Bit)
Package Name: com.mhd.flasher.fseries
Download: 71021+
Category: Auto & Vehicles
Updated on: Aug 19, 2022
Get it On:


Whats New In this MHD F+G Series?

– B58 gen1 pump maps revision 3.5 (improved stft, optimized ignition timing).
– Added flash option to keep iDrive Power/Torque gauges OEM.
– B58 gen1 burble aggressiveness settings reworked.
– More f90 and b58tu roms supported.


The MHD F+G Series is an excellent application that provides many features and benefits. The application is easy to use and provides a great user experience. The application is also very reliable and has a great performance. Overall, the MHD F+G Series is an excellent application that is definitely worth considering.

So, did you find the guide on how to download the MHD F+G Series for PC above? If you did, or if you have any questions regarding it, do comment and let us know. We’re here to help.


We refer the ownership of This MHD F+G Series to its creator/developer. We don’t own or affiliate for MHD F+G Series and/or any part of it, including its trademarks, images, and other elements.

Here at neworleansblaze, we also don’t use our own server to download the MHD F+G Series. We refer to the official server, store, or website to help our visitors to download the MHD F+G Series.

If you have any query about the app or about neworleansblaze, we’re here to help you out. Just head over to our contact page and talk your heart to us. We’ll get back to you ASAP.

What’s your Reaction?

Recent Posts